User-Maintenance - Jet JCDC-1.5 Bedienungsanleitung

7.0 User-maintenance

Turn OFF dust collector and
remove plug from power source before performing
any adjustments or maintenance. Failure to comply
may result in serious injury.
7.1 Cleaning and bag inspection
Clean canister filter frequently to keep the collector's
performance at its optimum. To clean filter, turn
handle a couple of rotations so dust falls into attached
collection bag.
Empty or replace canister and drum collection bags
when full.
ATTENTION:
During the changing or cleaning of the filters it's
necessary to use a mask (mask with filtration).
7.2 Motor inspection
Make frequent inspections of motor fan, and blow out
(with low pressure air hose) or vacuum any
accumulation of foreign material to maintain normal
motor ventilation.
7.3 Additional servicing
No lubrication is required for the dust collector.
Any other servicing should be performed by an
authorized service representative.
14