Pre-Installation Checklist - Bestway STEEL PRO Benutzerhandbuch

Vorschau ausblenden

Werbung

Pool Outlet Strainer
M
Filtro de saída da piscina
Tamiz de salida de la piscina
Poolauslass-Sieböffnung
Altaan lähtösiivilä
Waterafvoerzeef
Filtro uscita piscina
SIZE / TAMANHO /
ITEM / ITEM N.º /
TAMAÑO /
Nº ELEMENTO /
GRÖSSE / KOKO /
ARTIKEL-NR. / OSA
GROOTTE /
NRO / ARTIKELNR. /
DIMENSIONI /
ARTICOLO /
DIMENSION /
ELEMENT /
ΜΕΓΕΘΟΣ /
ΑΝΤΙΚΕΙΜΕΝΟ / №
РАЗМЕР /
ИЗДЕЛИЯ / NR POZ.
ROZMIAR / MÉRET
/ CIKKSZ. / ARTIKEL
/ STORLEK
4.88 m x 1.22 m
56725
(16' x 48")
56726
5.49 m x 1.22 m
56976
(18' x 48")
56977
3.96 m x 1.07 m
5614U
(13' x 42")
5614V
4.27 m x 1.22 m
56993
(14' x 48")
4.88 m x 1.22 m
56966
(16' x 48")
5.49 m x 1.32 m
56884
(18' x 52")
56886
6.10 m x 1.32 m
56881
(20' x 52")
56883
6.71 m x 1.32 m
56887
(22' x 52")
56889
NOTE: Some parts already have been installed on the pool.
EN
PT
NOTA: Algumas peças já foram instaladas na piscina.
ES
NOTA: Algunas partes ya han sido instaladas en la piscina.
DE
HINWEIS: Einige Teile wurden bereits am Pool installiert.
HUOMAA: Jotkin osat on jo asennettu altaaseen.
FI
NL
OPMERKING: Sommige delen werden al op het zwembad
geïnstalleerd.
IT
NOTA: Alcune parti sono già state installate sulla piscina.
REMARQUE : Certaines pièces ont déjà été installées sur
FR
la piscine.
ΣΗΜΕΙΩΣΗ: ΟΡΙΣΜΕΝΑ ΕΞΑΡΤΗΜΑΤΑ ΕΧΟΥΝ ΗΔΗ
EL
ΕΓΚΑΤΑΣΤΑΘΕΙ ΣΤΗΝ ΠΙΣΙΝΑ.
ПРИМЕЧАНИЕ. Некоторые детали уже установлены на
RU
бассейне.
UWAGA: Niektóre z części zostały już zamontowane do basenu.
PL
HU
MEGJEGYZÉS: Néhány részegység eleve fel van szerelve
a medencére.
SV
OBS! Vissa delar redan har installerats på poolen.
Crépine de sortie de piscine
ΣΗΤΑ ΕΞΟΔΟΥ ΠΙΣΙΝΑΣ
Сетчатый фильтр сливного
отверстия
Sitko odpływu basenu
Medencekimeneti szűrő
Poolens utloppssil
PART CODE / CÓDIGO DE
QTY / QTDE
PEÇA / CÓDIGO DE PIEZA /
/ CANT. /
TEIL-CODE / OSAN KOODI /
MENGE /
ONDERDEELCODE /
KPL / AANT. /
CODICE DEL
QTÀ / QTE /
ΠΟΣΟΤΗΤΑ /
COMPONENTE / CODE
PIECE / ΚΩΔΙΚΟΣ
К-ВО /
ΤΜΗΜΑΤΟΣ / КОД ДЕТАЛИ /
ILOŚĆ /
KOD CZĘŚCI / ALK. KÓDJA /
MENNY. /
DELKOD
ANTAL
P6(H2)1323ASS18
P6(H2)1323ASS18
/
/
P6(H2)1323ASS18
P6(H2)1323ASS18
P6(H2)1323ASS18
P6(H2)1323ASS18
EN

Pre-Installation Checklist

• The pool must be set up on a completely flat and level
surface. Please do not install the pool if the surface is
inclined or sloped.
• The selected location must be capable of uniformly
supporting the weight for the entire time the pool is
installed with water, moreover the location must be flat,
must be cleared of all objects and debris including
stones and twigs.
• The pool must be away from any objects children could
use to climb into the pool.
• Position the pool near an adequate drainage system to
deal with overflow or to discharge the pool. We
recommend picking a location that is at least 20' away
from your home.
Incorrect conditions to set up the pool:
• On uneven ground the pool may collapse causing
serious personal injury and/or damage to personal
1
property and will void the warranty and prevent any
service claims.
• Sand should not be used to create a level base; the
1
ground must be dug out if necessary.
• Directly under overhead power lines or trees. Be sure
0
the location does not contain underground utility pipes,
lines orcables of any kind.
• Do not set up the pool on driveways, decks, platforms,
0
gravel or asphalt surfaces. The selected location should
be firm enough to withstand the pressure of the water;
1
Mud, sand, soft / loose soil or tar are not suitable.
• Grass or other vegetation under the pool will die and
1
may cause odors and slime to develop, therefore we
recommend removing all grass from the selected pool
location.
1
• Avoid areas prone to aggressive plant and weed
species that may grow through the liner.
1
Pre-installation:
Bestway will not be responsible for damage caused to the
pool due to mishandling or failure to follow these
instructions.
1. Lay out all parts and check that you have the correct
quantities as listed in the components list. For
assistance or FAQs, please visit the support
section on our website, www.bestwaycorp.com.
2. Spread out the pool and make sure the pool is right
side up, let it sit exposed to direct sunlight for 1 hour or
more so that the pool is more flexible during set up.
3. Place the pool near an adequate drainage system to
deal with overflow water and ensure the pool's inlet A
and outlet B are correctly positioned to allow your filter
pump to connect to a power source.
NOTES:
• Do not use extension power cords to power your pump.
• Do not drag the pool on the ground, this can damage
the pool.
• Check with your local city council for by-laws relating to
fencing, barriers, lighting and safety requirements and
ensure you comply with all laws.
• If have a filter pump, refer to the pump's manual for
instructions.
The ladder must match the pool size and should to be
used only for entering and exiting the pool. It is forbidden
to exceed the permitted payload of the ladder. Check
regularly if the ladder is properly assembled.
10

Quicklinks ausblenden:

Werbung

loading

  Andere Handbücher für Bestway STEEL PRO

Inhaltsverzeichnis