Check Scope Of Delivery; Assembly - Zipper Maschinen ZI-RPE60C Betriebsanleitung

15

ASSEMBLY

Check scope of delivery

After delivery, check the machine immediately for transport damage and missing Parts.
Assembly
The machine is delivered pre-assembled. The parts that have been dismantled for transport must
be assembled before commissioning / use.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-RPE60C & ZI-RPE90C29
1. Connect the two parts of the retaining
bracket
2. Install the transport device using the
threaded rod.
3. Take the throttle cable which is rolled up
on the engine and fix the throttle clamp
on the handle.
4. Make sure that the upper throttle lever is
set to minimum ("turtle" symbol).
5. Finally, secure the throttle cable to the
retaining bracket with two cable ties.
6. If necessary, attach the rubber mat to the
bottom of the machine using the metal
strips and screws supplied.
ASSEMBLY
29