Cleaning And Maintenance; Technical Specifications - Texas Pro Cut 420 Bedienungsanleitung

Cleaning and Maintenance

After use remove any moss attached to the shield. Stop the motor, remove the sparkplug
cap and tip the machine back. Clean under the shield with a brush.
If cleaning the machine with a hose, use a low pressure so as to avoid damaging the
machines stickers. Also avoid spraying the blade bearing directly. After washing the
machine it is a good idea to start the machine and let the rotor blades run without
resistance for a short period of time.
Never use a high pressure cleaner to clean the lawn spiker.
Spray exposed areas with a corrosion protective spray.
Never tilt the machine more than 20 degrees as this can result in oil leaking into the
cylinder.
Follow the motor manual instructions when performing motor maintenance.

Technical specifications

Product
Engine
Drive system
Knife activation
Instrument
Working width
Rear discharge
Rear collect
Working height min-max 15mm
Working height steps
Height adjustment
Cutting deck
Equipment
Collection volume
Knife type
Throttle
Dimensions
Front wheel size
Rear wheel size
Weight
Emission data
LWA guaranteed
Pro Cut 420TG
TG620
Belt clutch
42 cm
Yes
Yes
7
Central
Metal
50L
Fixed
Yes
7"
7"
38 Kg
99 dB(A)
11