Herunterladen Inhalt Inhalt Diese Seite drucken

Sparkplug; Storing And Maintenance - Texas Vario 50 TR/W Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 26

Sparkplug

1. Remove the spark plug cap.
2. Brush off dirt from the top of spark plug.
3. Use a spark plug wrench to loosen the spark plug.
4. Check that the isolation is intact.
5. Clean the spark plug with a steel brush.
6. Measure the electrode distance. Be careful not to damage the electrode.
7. The distance should be: 0,7 - 0,8 mm
8. If the spark plug is undamaged refit. Otherwise replace using Denso type
W16EPR-U for TG685. For the B&S 675 please check with the separate engine
manual.
9. Mount the spark plug cap

Storing and maintenance

Maintain your lawnmower on a regular basic:
Check all bolts, screws and deck. Always make sure the knife is sharp. It is
recommended that the knife is changed every 2 years. It is a good idea to let your local
service shop check your lawnmower once a year.
Storing: Keep the lawnmower in dry clean room. Clean the machine every time it has
been used. Grass and dirt must be removed from the inside of the cutting deck. Tilt the
front of the lawnmower for cleaning, maximum 45 degrees. If you tilt it to the side, the
carburettor and air filter must always turn up. If it does not turn up, the oil may run out
and damage the engine. Always make sure the cap is removed from the spark plug
when the lawnmower is being maintained.
Winter storage: Empty the fuel tank and let the engine run until there is no fuel left.
Remove the cap for the spark plug. Remove the spark plug and add one tablespoon of
oil in the hole. Pull the starting cord several times. Mount the spark plug, but not the
cap. Change oil according to the above chapterFinally the lawnmower is cleaned.
Remove all the dirt and grass from everywhere. Dip a cloth in oil and cover the deck
and handle in a thin layer of oil, to keep it from rusting.
Warranty
 2 years of warranty is given on your lawnmower.
 The warranty covers material and/ or fabrications faults.
 The warranty does not cover damages, which has occurred because of tear, bad use
and lack of maintenance.
 The warranty does not cover cleaning of the fuel system, exchange / adjustment of the
starter cord, starting spring, spark plug, knife, knife holder, belt and cables.
 The warranty does not cover if unoriginal spare parts have been used.
 It is always a service shop, which decides if a case is a warranty claim, or not.
 Your receipt is your warranty note. Always keep it.
Remember: The engine number and the model must always be given to the shop
when spare parts are purchased.
21

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Vario 50 tr/wb

Inhaltsverzeichnis