Noise And Vibration Declaration Statement - Husqvarna Soff-Cut 150 Bedienungsanweisung

5
Vibration levels, a
hveq
2
Right handle, m/s
2
Left handle, m/s
Saw blade
Blade type
Material
Max. blade size, mm/in
Max. cut depth, mm/in
Cutting distance from wall, mm/in
Blade rotation
Blade shaft speed, rpm
Blade depth control
6
Average cutting rate
Soft aggregates, m/min or ft/min
Medium aggregates, m/min or ft/min
Hard aggregates, m/min or ft/min
Recommended dust extractors
Min. Air flow CFM or m
Min. Vaccum, psi/kPa
Min. Water lift, m/in.
Dust extractor attachment, mm/in.
Noise and vibration declaration
statement
These declared values were obtained by laboratory type
testing in accordance with the stated directive or
standards and are suitable for comparison with the
declared values of other products tested in accordance
with the same directive or standards. These declared
values are not suitable for use in risk assessments and
values measured in individual work places may be
higher. The actual exposure values and risk of harm
experienced by an individual user are unique and
depend upon the way the user works, in what material
the product is used, as well as upon the exposure time
5
Vibration level according to EN 13862. Reported data for vibration level has a typical statistical dispersion
(standard deviation) of 1 m/s
6
Estimate only. Speed will vary with job conditions and concrete mixes.
7
Technical data for dust extractors are not conclusively describing actual performance over time between dif-
ferent dust extractors. For Husqvarna products OSHA objective data are available at www.husqvarnacp.com/
us/.
714 - 004 - 06.07.2021
Soff-Cut 150
5.9
4.0
Diamond blade, dry cut with tri-arbor
Green concrete only
165/6.5
38.1/1.5
76/3
Counterclockwise, upcutting
4500
Manual
3.7 or 12
2.4 or 8
1.2 or 4
7
3
/h 236 or 400
3.6/22
2.3/90
60/2
2
.
Soff-Cut 150D
5.9
4.0
ProEdge radius and beveled blades
Control joints on cured concrete only
152/6
27/0.5
114/4.5
Counterclockwise, upcutting
4500
Manual
and the physical condition of the user, and the condition
of the product.
29