Sensor Installation - STIEBEL ELTRON STH 210 Plus Bedienung Und Installation

INSTALLATION
Installation
STH 210-415 Plus
STH 720 Plus | STH 720-1 Plus
www.stiebel-eltron.com
8.6 Heating water connection
Note
Connect the hydraulic connections with flat gaskets.
8.6.1 Fitting the drain valve
f To facilitate maintenance work on the appliance, fit a drain f
valve (not included in standard delivery) in the lowest con-
nection line.
8.6.2 Fitting the air vent valve
Material losses
!
Before filling the appliance, fit an air vent valve to prevent
water damage.
8.7

Sensor installation

1 2 3 4
1 Plug
2 Sensor lead
3 Spring shackle
1
2
3
4
1 Cover sleeve
2 Plug
3 Sensor lead
4 Thermal insulation
f Plug the cover sleeve into the sensor well. f
f Bend the temperature sensor spring shackle forwards. f
f Route the temperature sensor through the cover sleeve and f
push it into the sensor well, as far as the cylinder wall.
5
4 Temperature sensor
5 Cover sleeve
6 Sensor well
5
6
7
8
5 Spring shackle
6 Temperature sensor
7 Cylinder wall
8 Sensor well
STH Plus |
6
17