STIEBEL ELTRON STH 210 Plus Bedienung Und Installation Seite 15

INSTALLATION
Installation
Minimum clearances
STH 210-415 Plus
The minimum side clearances specified enable accessories to be
installed.
The minimum side clearances can be swapped between left and
right.
≥100
≥800
STH 720 Plus | STH 720-1 Plus
≥100
f Maintain the minimum clearances. f
www.stiebel-eltron.com
≥800
≥100
≥100
8.2 Releasing the transport lock (STH 210-415 Plus)
6
5
1 Nut
2 Washer
3 Threaded pin
4 Shipping pallet
5 Adjustable feet (STH 210-415 Plus)
6 Thermal insulation
f Remove the packaging material from the cylinder. The corru- f
gated cardboard serves as padding for the following steps.
f Tilt the appliance together with the shipping pallet onto its f
side and place it on the corrugated cardboard or another
suitable underlay.
f Undo and remove the nut and washer on the underside of f
the shipping pallet.
f Pull the shipping pallet away from the appliance. Lay the ap- f
pliance down carefully on the padding while doing so.
f Undo and remove the threaded pin on the underside of the f
appliance.
f Press one of the supplied plugs into the now exposed aper- f
ture in the thermal insulation.
STH 210-415 Plus
This appliance comes with adjustable feet as standard.
f Wind the adjustable feet out far enough so they protrude be- f
yond the thermal insulation.
f Stand the appliance upright. f
3
2
1
4
STH Plus | 15