Appendix B - Signal Configurations; 0X41 4 Fading Leds; 0X43 4 Running Lights; 0X47 Universal - roco Z21 signal DECODER Bedienungsanleitung

Appendix B - Signal configurations

The following signal configurations are included on delivery condition FW V1.10 in the Z21 signal DECODER, and can be selected via
the Z21 per LINK or CV #41 to #44. See also
and firmware update via zLink.
INFORMATION: You can always find all the latest details on the individual signal configurations online under:
z21.eu/en/products/z21-signal-decoder/signaltypen.
In addition to country-specific signals, you can also find internationally-applicable configurations in the following table, for example
the highly flexible signal configurations "Universal" or "Railway crossing". There are also configurations which can be used for general
lighting purposes.
Signal-ID Name
decimal hex
64 0x40 4 single LEDs
4 single lamps, individually switchable.
65 0x41 4 fading LEDs
4 single lamps, individually switchable with light bulb
simulation (gentle fade-up and fade-down).
67 0x43 4 running lights
4 warning lamps for construction sites (guiding light
system)
Running light
Illuminated advertising
Warning light for emergency vehicles (blue light)
71 0x47 Universal
Highly flexible configuration for light signals of simpler
construction from different countries.
INFORMATION: This is the factory setting.
72 0x48 Universal #2
Like Universal, but with a red flashing light for "Subs-
titution" (for SBB, SNCF).
73 0x49 Railway crossing
Internationally-applicable alternate flash for railway
crossings, optionally with white operational readiness
display and yellow trackside signal for the traction unit
driver.
77 0x4D 10777
Similar to ROCO 10777.
Connecting the Z21 signal DECODER, Operation on DCC control centres, Configuration
Image
https://www.
Z21 ist eine Innovation von FLEISCHMANN und ROCO
63