Cameo F4 FC PO IP65 Bedienungsanleitung Seite 8

STAND-ALONE MODE DIRECT LED (RGBW color mix)
Starting from the main display, press on the left push button rotary encoder to move to the mode selection menu. Rotate the left encoder
(SELECT) to select "Direct LED" mode (as indicated by selector arrow on left) and confirm by pressing the left encoder (ENTER). The total
brightness and intensity levels for R, G, B and W can now be configured using the three push button rotary encoders (see illustration).
currently activated mode
Rotate encoder =
set overall brightness level (DIM)
Press encoder =
select mode
STAND-ALONE MODE GEL (Color Filter Presets)
Starting from the main display, press on the left push button rotary encoder to move to the mode selection menu. Rotate the left encoder
(SELECT) to select "GEL" mode (as indicated by selector arrow on left) and confirm by pressing the left encoder (ENTER). The brightness
level (DIM) and color filter preset (Gel) can now be set using the left and center push button rotary encoder (see illustration). The color filter
presets with Lee filter designations and corresponding Rosco filter numbers can be found in the DMX tables under DMX CONTROL (channel
"Color Presets" e.g. in 10-channel mode, without "User Color 1 - 8").
currently activated mode
Rotate encoder =
set overall brightness level (DIM)
Press encoder =
select mode
8
Rotate encoder
Set R and B dim levels
Press encoder =
switch between R+G and B+W (Color)
Rotate encoder =
select filter preset
Fan mode
Rotate encoder
Set G and W dim levels
Press encoder =
Open main menu
Fan mode
Press encoder =
Open main menu