Herunterladen Inhalt Inhalt Diese Seite drucken

Cameo F4 FC PO IP65 Bedienungsanleitung Seite 7

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 18
SETTING THE DMX MODE (DMX Mode)
Starting from the main display, press on the right push button rotary encoder to move to the main menu. Rotate the left encoder (SELECT) to
select the "DMX Mode" menu item (as indicated by selector arrow on left) and confirm by pressing the left encoder (ENTER). You can now
select the desired DMX mode by rotating the left encoder. Confirm the choice by pressing on the left encoder (ENTER), which then returns
you automatically to the main display and activates the DMX mode. You can find tables on channel assignment in the different DMX modes
in these instructions under DMX CONTROL.
1CH DIM
2CH DIM 16Bit
2CH CCT
3CH RGB cal.
4CH Direct
4CH CCT 16Bit
6CH HSI-CCT
7CH RGB-CCT
8CH Direct 16Bit
10CH HSI-CCT
16CH Direct-CCT
STAND-ALONE MODE CCT (Correlated Color Temperature)
Starting from the main display, press on the left push button rotary encoder to move to the mode selection menu. Rotate the left encoder
(SELECT) to select "CCT" mode (as indicated by selector arrow on left) and confirm by pressing the left encoder (ENTER). Dim level,
correlated color temperature (CCT) and tint can now be configured using the three push button rotary encoders (see illustration).
currently activated mode
Rotate encoder =
set DIM
Press encoder =
select mode
STAND-ALONE MODE HSI (Hue - Saturation - Intensity)
Starting from the main display, press on the left push button rotary encoder to move to the mode select menu. Rotate the left encoder
(SELECT) to select "HSI" mode (as indicated by selector arrow on left) and confirm by pressing the left encoder (ENTER). Dim level, hue and
color saturation (SAT) can now be configured using the three push button rotary encoders (see illustration).
currently activated mode
Rotate encoder =
set DIM
Press encoder =
select mode
Rotate encoder =
set correlated color temperature (CCT)
Rotate encoder =
set Hue
Fan mode
Rotate encoder =
set Tint
Press encoder =
Open main menu
Fan mode
Rotate encoder =
set color saturation (SAT)
Press encoder =
Open main menu
7

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Clf4fcpoip

Inhaltsverzeichnis