Assembly - Stahl SolConex 8570/11 Betriebsanleitung

7

Assembly

7.1 Assembly, wall-mounted socket, type 8570/11-...
If exposed to the elements, the casing must be provided with a protective
canopy or wall.
Position for use: Hinged cover down, connection chamber up
Fasten the wall-mounted socket, in a vertical position, to a flat wall, using four screws.
The securing holes are elongated. This allows the casing to be adjusted both
vertically and horizontally.
Assembling the auxiliary contacts
Open the casing.
Insert the auxiliary contacts into the left or right receptacle (until they engage).
Both can be fitted if necessary.
Close the casing.
7.2 Assembly, plug type 8570/12-...
To prevent dirt from contaminating the contacts, a compatible sealing cap can
be used (see Chapter 12, "Accessories and Spare Parts").
Position for use: When the plug is disconnected, it must be hung with the pins pointing
downwards.
8570601300
S-BA-8570/11/12-03-en-31/01/2007
Wall-Mounted Socket, Plug
8570/11, 8570/12
Assembly
11203E00
9