Assembly; Theses - ATH-Heinl AC1234yf Bedienungsanleitung

2.6

Assembly

These instructions are not to be seen as assembly instructions; they only provide
information and help for knowledgeable and competent fitters. Appropriate clothing and
individual protective devices must be worn for the following work.
Incorrect assembly and settings lead to exclusion of liability and warranty.
Partially pre-assembled machines must be checked, instructed and approved by a competent and
competent person prior to commissioning.
The assembly of machines must be carried out by a competent and competent person.
Remove the transport lock
Loosen the locking screw on the back of the device.

2.10 Theses

Before commissioning, check all fastening screws, electrical, pneumatic and hydraulic
lines and tighten them if necessary. Attention: In some cases, this must be checked at
regular intervals and tightened if necessary (note in the instructions).
® Urheberrecht ATH-Heinl GmbH & CO.KG, Alle Rechte vorbehalten / Druckfehler und technische Änderungen vorbehalten / Stand: 2021-07
Produkthersteller ATH-Heinl GmbH & CO.KG
- 12 -