Function Table - ATH-Heinl AC1234yf Bedienungsanleitung

3.3.4 Function table

Main functions
System settings
® Urheberrecht ATH-Heinl GmbH & CO.KG, Alle Rechte vorbehalten / Druckfehler und technische Änderungen vorbehalten / Stand: 2021-07
Aspiration / recovery
Vacuum
Add oil
Add UV agent
Filling / changing
Automatic mode
Calibration
Language
Pressure release
(refrigerant bottle)
Hose system rinsing
Unit of measurement
Weight setting, empty
containers
Diagnosis
Produkthersteller ATH-Heinl GmbH & CO.KG
Sucks the refrigerant from the vehicle system into
the air conditioning station.
Evacuates air, moisture from the A / C system and
then automatically performs a vacuum leak test.
Adding compressor oil to the vehicle's A / C
system. The process can be carried out manually
or automatically.
Adding UV agents to the vehicle's A / C system to
locate leaks. The process can be carried out
manually or automatically.
Refrigerant from the A / C station is filled into the
vehicle's A / C system.
Executes the functions fully automatically
(automatic sequence). The A / C station will stop
automatically when the process is complete.
Calibration of the refrigerant bottle and the
balance for oil and UV agents
Choice of language
Here, the refrigerant cylinder pressure can be
released manually in the event of a fault in the
automatic control.
The pressure display is not a 100% indication of
the fill level.
If the compressor oil for the vehicle has to be
changed, this function flushes the hose system
from the A / C station.
Choice of metric or imperial units of measure (lb)
Enter the empty weight of the refrigerant bottle
and the bottles for oil and UV
Direct control of the internal electronic
components, solenoid valves, compressor,
vacuum pump. This is used to check in the event
of a malfunction.
- 18 -