Inhaltsverzeichnis
Werbung
2.0
INSTALLATION
The machine must be set up by authorized personnel in accordance with the instructions.
The operating instructions (including the protocol) are an important part
After completion of the assembly, handover, if necessary instruction and then regularly in accordance with
the regulations and legal provisions applicable in the country of use, the product must be checked by a
suitable and approved company or facility.
2.1
Transport & storage conditions
Always use suitable stop, lifting or floor conveyor equipment for transporting and positioning the
machine and pay attention to the center of gravity of the machine.
The machine should only be transported in the original packaging.
Data:
width
length
height
Storage temperature
2.2
Unpacking the machine
Remove the top cover from the packaging and make sure that no damage has been
caused during shipping.
Remove the locking bolt to remove the machine from the pallet / frame.
Use suitable lifting equipment (possibly with a sling rope) to lift the machine off the pallet
/ frame.
The packaging material used for the machine should be stored carefully.
Keep the packaging material out of the reach of children as it can be a source of danger.
® Urheberrecht ATH-Heinl GmbH & CO.KG, Alle Rechte vorbehalten / Druckfehler und technische Änderungen vorbehalten / Stand: 2021-07
the machine or the product.
!!!PLEASE STORE AWAY SAFELY!!!
----
----
----
----
-10 to +50 °C
Produkthersteller ATH-Heinl GmbH & CO.KG
- 9 -
Werbung
Kapitel
Inhaltsverzeichnis
