Mercedes-Benz New Alustyle Montageanleitung Seite 36

9
11
II
Notes
To prevent paint damage, clean the basic carrier bar
mounts (see arrows) before placing them onto the
vehicle roof.
14
When mounting the basic carrier bars on C-Class
vehicles (model series W 204) equipped with the
optional sliding/pop-up roof (Code 413), make sure
that the covers (see arrow) are in between the
protective enclosure (14) and the mounts (15).
12
4
10
15
M+P-03F-6650
1
12
6
2. Place the basic carrier bar (1) as illustrated, on
the front left mounting point on the roof of the
vehicle (6), so that the screws (9) are positioned
directly over the mounting points (10). If necessary,
using the tool (4), loosen the screws (12) on both
sides and position the basic carrier bar (1) so that the
screws (9) can be tightened by hand.
3. Lift the lever (11) and tighten the screws (9) by
hand.
Important
The lever (11) is used to tighten the screws (9)
and prevents them from loosening by
themselves.
4. Tighten the screws (9) using the lever (11). Then
put the lever (11) back in place in such a way (e.g. in
position I and II), that the cover caps can be put back on.
5. Tighten the screws (12) with the tool (4).
- 33 -
4
I
9
11
10
M+P-03F-5597