Beha-Amprobe UAT-505-EUR Bedienungsanleitung Seite 26

UAT-600-RE Receiver
Operating voltage
Tracing modes
Locating modes
Sensitivity adjustment
(gain control)
Depth measurement
Depth measurement accuracy
Sensitivity at 1 m (typical)
Display backlight
Audio indication
Compatible transmitter
Display
Update rate
Operating temperature and
humidity
Storage temperature and
humidity
Operating altitude
Pollution degree
IP-rating
Drop proof
Power supply
Auto power off
Battery life
Low battery indication
Measurement Category
Agency approval
Safety compliance
Electromagnetic Compatibility
Size (H x W x L)
Weight
0 to 600 V
Active tracing: 33 kHz (32,768 Hz) and 8 kHz (8,192 Hz)
Passive tracing: 50 / 60 Hz and Radio
Peak and Null
Yes
Up to 6 m (20 ft)
0.1 m (4 in) to 3m (10 ft): ± 3 %
3 m (10 ft) to 6 m (20 ft): ± 5 %
Power: 2 mA
Radio: 20 µA
8 kHz: 5 µA
33 kHz: 5 µA
Automatic
Increasing closer to the signal
UAT-500-TE + UAT-600-TE Transmitter
109 mm (4.3 in), 320 x 240 BW outdoor LC-Display with auto backlight
Instantaneous
-20 °C to 50 °C (-4 °F to 122 °F), ≤90% RH
-40 °C to 60 °C (-40 °F to 140 °F), ≤90% RH
< 2000 m (< 6561 ft)
2
IP54
1 m (3.28 ft)
Six (6) 1.5 V AA alkaline batteries
15 minutes idle
Will auto turn off after 15 min of no button pressing
Approx. 35 hours at 21 °C (70 °F) (Typical)
and/or at upper right corner of the screen
CAT IV 600 V
�
IEC 61010-1, IEC 61010-2-033
CSA/UL 61010-1, CSA/UL 61010-2-033
IEC 61326-1 Korea (KCC): Class A Equipment (Industrial Broadcasting &
Communication Equipment)
[1]
This product meets requirements for industrial (Class A) electromagnetic
wave equipment and the seller or user should take notice of it. This
equipment is intended for use in business environments and is not to be
used in homes.
Approx. 302 x 120 x 779 mm (11.9 x 4.7 x 30.7 in)
Approx. 1.9 kg (4.2 lb) (batteries installed)
22
[1]