T-Mode; 3-4. Tt-Mode; 3-5. T-Cyan Mode - Sony TRINITRON KV-21CT1B Servicehandbuch

3-3. T-MODE:

T-Mode is available by pressing the 'TEST' button once,
OSD 'T' appears. The function described below are
available by selecting the indicated keys. The 'T' is released
automatically after each command is executed.
KEY
volume +
volume –
picture +
picture –
colour up
colour down
brightness-bright
brightness-dark
hue-purplish
hue-greenish
sharpness-sharp
sharpness-soft
balance left
balance right
treble up
treble down
bass up
bass down

3-4. TT-MODE:

TT-Mode is available by pressing the 'TEST' button twice,
OSD 'TT – –' appears. The function described below are
available by pressing two digits.
00 Exit from TT mode
01 Set Picture Level to Maximun
02 Set Picture Level to Minimum
03 Set Volume to 35%
04 Set Volume to 50%
05 Set Volume to 65%
06 Set Volume to 80%
07 Ageing Mode On
08 Shipping Condition
11 Sub Picture Adjustment
12 Sub Colour Adjustment
13 Sub Brightness Adjustment
14 Text H Position Adjustment
15 Rotation Coil Test
19 Factory Mode Enable/Disable
21 Destination ADEKR
22 Destination BL
24 Destination U
31 Auto Shutoff Disable/Enable
33 Rotation On/Off
41 Re-initialise NVM
43 Select Dual A Sound (only stereo)
44 Select Dual B Sound (only stereo)
45 Select Mono Sound (only stereo)
46 Select Stereo Sound (only stereo)
T-MODE FUNCTION
volume maximum
volume minimum
picture maximum
picture minimum
colour maximum
colour minimum
brightness maximum
brightness minimum
hue-purplish
hue-greenish
sharpness maximum
sharpness minimum
balance full left (only stereo)
balance full right (only stereo)
treble maximum (only stereo)
treble minimum (only stereo)
bass maximum (only stereo)
bass minimum (only stereo)
KV-21CT1B/21CT1U/21CT1E/21CT1K
48 Set NVM as non-virgin
49 Set NVM as virgin
61 Auto AGC Adjustment
64 RGB priority (toggle)
On: FS input (Pin 16)is always active
Off: FS input is active only in AV1 (Scart)
65 RGB Auto Detection (Toggle)
Auto: AV1 or RGB is automatically selected at
the change of AV input to AV1 (Scart) by user or
mode Pin 8
Off: AV input toggle has AV1 and RGB
respectively (TV --> AV1 --> RGB --> AV2 -->...)
67 Manual AGC Adjustment
71 Force PAL Video
72 Un-force PAL (cancel the function above)
73 Enable Zweiton D/K2 System (6.5/6.74)
(only stereo)
74 Enable Zweiton D/K3 System (6.5/5.74)
(only stereo)
78 Balance Full Left (only stereo)
79 Balance Full Right (only stereo)
81 Auto NICAM DCXO calibration (only stereo)
87 Local Keys Test
93 Set 16:9 zoom mode
95 Set 4:3 Zoom Mode
99 Display Error and Working Time Menu
To release the 'TT-Mode', press 0 twice, press 'TEST',
press 'TV' or switch the TV into standby mode.

3-5. T-Cyan MODE:

T-Cyan Mode is available by pressing the 'TEST' and 'Cyan'
keys. T-Cyan is basically for white balance and geometry
adjustments. The functions described below are available
by pressing the indicated keys.
In T-Cyan Mode a single 'T' is displayed in cyan colour. To
release from this mode, press the 'TV' key once.
KEY
1
2
3
4
5
6
7
8
9
0
Volume +
Volume –
Programme +
Programme –
Cyan
Yellow
Green
Red
Video
Information
– 25 –
T CYAN FUNCTION
Pin Amplitude –
Vertical Centre –
Pin Amplitude +
Vertical Centre –
Vertical Size +
Horizontal Centre +
Horizontal Size –
Vertical Centre +
Horizontal Size +
Vertical Size –
Upper Corner Pin +
Lower Corner Pin +
Upper Corner Pin –
Lower Corner Pin –
Bow –
Pin Phase –
Bow –
Pin Phase +
Vangle +
Vangle –
RM-W100