Film Mode; Connection Guide - Sony KE-P37XS1 Bedienungsanleitung

FILM MODE

This option is set to Auto to improve the quality of the pictures in movement of the films. To cancel this function,
v V
press to select Off. Finally, press OK to store.
or
AV2 OUTPUT / AV3 OUTPUT
The "AV2 Ouptut" and "AV3 Output" options allows you to select the source to be output from the Scart connectors
3/ and 2/ 2 so that you can record from these Scart any signal coming from the TV or from an
S
external equipment connected to the Scart connector
or 5 and 5.
If your VCR or DVD recorder supports SmartLink, this procedure is not necessary.
To do this:
Once you have entered into the "Features" menu as it is explained in the previous page and after selecting the option,
v
press OK. Then press or
TV to output the aerial source.
AV1 to output sources connected to
AV2 to output sources connected to
AV3 to output sources connected to
AV5 to output sources connected to
AUTO to output the signal that is being viewed on the TV.
• If you select "AUTO", the output signal will always be the same one that is displayed on the screen.
• If you have connected a decoder to the Scart
Scarts, please remember to change back the "AV2 Output" or "AV3 Output" to "TV" for correct
unscrambling.
SMARTLINK
Both Scart connectors
same time. This option allows you to select which of the Scart connectors you want to support SmartLink.
To do this:
Once you have entered the "Features" menu as it is explained in the previous page and after selecting the option, press
v V
OK. Then press or to select AV2 or AV3. Finally press OK to store.

CONNECTION GUIDE

Even you have already connected the external equipment to the TV set, it is important for you to follow the
instructions of this menu. If you proceed in this way, you will get the optimum picture settings related with the
optional equipment.
To do this:
1
Once you have entered the "Features" menu as it is explained in the previous page and after selecting the option,
v
press OK. Next press
Decoder, DVD, GAME, VIDEO or DVD rec. (DVD recorder). Next press
(equipment selected also can be deleted by pressing
v V
press or to select "Confirm" and press OK.
2
A new menu will appear showing you on which Scart connector of the rear of the TV should be connected each
equipment. Please connect each equipment according to this information to get the optimum picture setting of the
optional equipment.
We strongly recommend you to follow our connection proposals, but in case you do not agree press
to select "No" and next press the OK button. A new menu appears on the screen in which you can assign the
connections according to your preferences.
3
Once you have connected the optional equipment, press
of the remote control.
V
to select the desired output signal:
1/ .
2/
3/
S
5 or
2/ and 3/ support SmartLink, but they cannot support SmartLink at the
S
V
or to chose the equipment you want to connect among the available: SAT (satellite),
1/ , 2/ and
(only for AV3 Output).
(only for AV2 Output).
5 and 5.
S
2/ or 3/ 3 or to a VCR connected to one of these
S
b
B
). Once you have selected all the equipment to be connected,
B b
or to select "OK" and finally press the OK button
3/ or side connectors
S
to select the equipment chosen
B
continued...
TV Functions
5
S
GB
b
or
23