Manual Programme Preset - Sony TRINITRON KV-21CT1B Servicehandbuch

Manual
Programme
Preset
14
Menu System
The "Manual Programme Preset" option in the "Channel Set Up"
menu allows you to:
a) Preset channels or a video input source one by one to the
programme order of your choice.
To do this:
1 After selecting the "Manual Programme Preset" option, press
. Highlight the Programme option and press
to select a programme number on which you want to preset
the channel (for VCR, select programme number "0"), then
press .
The following option is only available depending on the
country you have selected in the "Language/Country"
menu.
2 After selecting the System option, press
select the TV Broadcast system (B/G for western European
countries or D/K for eastern European countries), then perss
.
3 After selecting the Channel option, press
to select the channel tuning (C for terrestrial channels or S
for cable channels). Next press
buttons to directly enter the channel number of the TV
Broadcast. If you do not know the channel number, press
to search for it. When you tune the desired channel, press
twice to store.
Repeat all the above steps to tune and store more channels.
b) Normally the automatic fine tuning (AFT) will give the best
possible picture, however you can manually fine tune the TV to
obtain a better picture if the picture is distorted.
To do this:
While watching the channel (TV Broadcast) you wish to fine
tune, select the AFT option and press
adjust the fine tuning between -15 and +15. Finally press
twice to store.
c) Skip any unwanted programme numbers when they are selected
with the PROG +/– button.
To do this:
Highlighting the Programme option, press PROG +/– to select
the programme number you want to skip. When the
programme you want to skip appears on the screen, select the
Skip option and press
Finally press twice to confirm and store.
To cancel this function afterwards, select No instead of Yes in the step
above.
. Press
. Then press
. After that, press the number
. Next press
. Next press or
. Press or
or to
or
or
or to
to select Yes.