Beurer BM 96 Cardio Gebrauchsanweisung Seite 65

Problem /
Error Message
The cuff does not
inflate.
The blood pressure
measurements are very
high/low.
Stored measured
values can no longer
be retrieved from the
memory.
The ECG measurement
does not start even
though there is contact
with the skin.
® connection
Bluetooth
failed.
Possible cause
The cuff line is not correctly
inserted into the device.
The cuff is ruptured.
The cuff was not attached
correctly.
You moved or talked during the
measurement.
The measurement was obstruct-
ed by clothing.
Old measured values have been
overwritten by more recent val-
ues as the memory is full.
Insufficient contact pressure.
Connection problems between
the smartphone/tablet and the
app.
Unknown error messages.
Solution
Ensure that the cuff line is correctly
inserted into the device.
Replace the cuff. Contact Customer
Services.
Re-attach the cuff.
Do not move or talk during the meas-
urement.
Ensure that clothing cannot obstruct
the arm cuff during the measurement.
Download the stored measured val-
ues to your computer every so often.
Ensure that the lower electrode is
pressed firmly against the skin.
Switch off the main unit, close the
app, and deactivate and reactivate
Bluetooth
let. Try to re-establish the connection.
Remove batteries, reinsert batteries.
Should the problem persist, contact
Customer Services.
65
® on your smartphone/tab-