Alarm Setting - Bresser ClimaTemp TB + Sensor Bedienungsanleitung

2.
3.
4.
5.
6.

11 Alarm setting

1.
2.
3.
4.
5.
6.
7.
8.
9.
14 / 40
Digits to be set are flashing.
Press UP/CF or DOWN/RCC button to change the
value.
Press the MODE button to confirm the and switch to
the next setting.
Settings sequence: Time zone > Hours > Minutes >
Year > Month > Day > Language
Finally, press the MODE button to save the settings
and exit settings mode.
Press the MODE button repeatedly to select the de-
sired alarm function: AL1 or AL2. The display changes
according to the set alarm time.
Press the MODE button for about 3 seconds to switch
to the setting mode for the corresponding alarm time.
The value to be set flashes.
Press the UP/CF or DOWN/RCC button to change the
value.
Press the MODE button to confirm the and switch to
the next setting.
Settings sequence: Hours > Minutes
Finally, press the MODE button to save the settings
and exit settings mode.
In normal display mode, press the MODE button to dis-
play the desired alarm time.
To activate the alarm, press the ALARM button when
the alarm time is selected until the corresponding alarm
symbol (alarm clock) is displayed.