Automatic Time Setting; Manual Time Setting; Alarm Setting - Bresser ClimaTemp TB+Sensor Bedienungsanleitung

9.
NOTICE! When operating only one wireless sensor, channel
1 is recommended as the default setting.

9 Automatic time setting

After the powering it on, the unit automatically searches for
the radio signal. It takes about 3-8 minutes to complete this
process.
If the radio signal is received correctly, the date and time
are set automatically and the reception symbol is displayed.
If no radio signal is received, proceed as follows:
1.
2.

10 Manual time setting

1.
2.
3.
4.
5.
6.

11 Alarm setting

1.
14 / 44
Press the SET button for approx. 2 seconds.
Press the RCC button for approx. 2 seconds to initiate
the reception of the radio signal again.
If no radio signal is still received, the time must be set
manually.
In normal display mode, press the MODE button for
about 3 seconds to enter the time settings mode.
Digits to be set are flashing.
Press UP/CF or DOWN/RCC button to change the value.
Press the MODE button to confirm the and switch to
the next setting.
Settings sequence: Time zone > Hours > Minutes > Year
> Month > Day > Language
Finally, press the MODE button to save the settings and
exit settings mode.
Press the MODE button several times to select the de-
sired alarm function: AL 1) or AL 2. The display changes
to the set alarm time.