Alarm Setting - Bresser Pro Bedienungsanleitung

14 Manual time setting and other user defined
settings
To set the time / date manually, first disable the reception of
the time signal by pressing the RCC button for approx. 8
seconds.
1.
2.
3.
4.
5.
6.

15 Alarm setting

1.
2.
3.
4.
5.
6.
7.
16 / 52
Press and hold CLOCK button for approx. 3 seconds to
change to time setting mode.
Digits to be set are flashing.
Press UP/CH button or DOWN/Contrast Button to
change the value.
Press CLOCK button to confirm and continue to the
next setting.
Settings order: 12/24 hours mode > Hours > Minutes >
Seconds > Year > D/M-M/D display change > Month >
Day > Time offset > Language > DST AUTO/OFF
Finally press the CLOCK button to save the settings and
exit the setting mode.
Press and hold ALARM button for approx. 3 seconds to
enter the alarm time setting mode.
Digits to be set are flashing.
Press UP or DOWN button to change the value.
Press ALARM button to confirm and continue to the
next setting.
Settings order: Hours > Minutes
Finally press the ALARM button to save the settings and
exit the setting mode. Alarm will be activated automat-
ically. The symbol will be displayed.
Press ALARM button in normal display mode to display
the alarm time.