Time Zone Setting; Alarm Setting - Bresser Quadro Neo + 3 Sensors Bedienungsanleitung

1.
2.
3.
4.
5.
6.
*The language setting refers to the days of the week as well
as to the room names. Available languages: English, Ger-
man, French, Spanish, Italian, Danish, Swedish

11 Time zone setting

The time zone is set as part of the manual time setting. You
can also find more detailed information in the chapter
"Manual time setting".
1.
2.
3.
4.

12 Alarm setting

NOTICE! The alarm setting cannot be made when the time
signal search is active (the corresponding symbol flashes).
Wait until the time signal search is completed to be able to
set the manual alarm.
12 / 36
Press the SET button for approx. 3 seconds to enter the
time setting mode.
Digits to be set are flashing.
Press UP or DOWN button to change the value.
Press the SET button to confirm and switch to the next
setting.
Settings sequence: Hours > Minutes > 12/24 hour mode
> Year > Month > Day > Time zone > Language
Finally, press the SET button to save the settings and
exit settings mode.
Press the SET button for approx. 3 seconds to enter the
time setting mode.
Press the SET button several times until the display
shows the setting for the time offset (the factory setting
is '00').
Press UP or DOWN button to select the desired time de-
viation in hours (-23 up to +23 hours).
Press the SET button for approx. 3 seconds to confirm
the selected time deviation.