Ze-Geräteregistrierung (2) - ABB RELION REB500 Handbuch

1MRK 511 452-UDE Rev. C
9.35 ZE-Geräteregistrierung (2)
IEC18000861 V1 EN-US
Dezentraler Sammelschienenschutz REB500
Engineering-Handbuch
The Build Process creates a new CU including the specified
hardware options:
Redundant power supply on CU (or not)

 Power supply type (voltage range)
 Set the number of BIO boards (number of I/O's)
 Press Finish.
The Build Process completes now the configuration of the CU.
After the build process of the CU device creator was started once,
it can be repeated again (for example, to reflect subsequent
corrections resulting from system configuration changes).
© 2019 - 2021 Hitachi Power Grids. Alle Rechte vorbehalten
Abschnitt 9
Anhang B | Konfigurationsmodus - Systemkonfiguration
GUID-B427F50D-C0B0-414F-80C5-A7B19E713AE9 v2
85