Sld-Conf - Sammelschienenzuordnung (2) - ABB RELION REB500 Handbuch

Abschnitt 9
Anhang B | Konfigurationsmodus - Systemkonfiguration
9.32

SLD-CONF - Sammelschienenzuordnung (2)

Note: For the initial configuration of a standard bus (single-line diagram), the bus zone
assignment is performed completely by the configurator tool.
For complex bus configurations, or for reconfiguration (extension) of existing setfiles,
it might be necessary to Reassign Buszones.
IEC18000858 V1 EN-US
Siehe
82
Abschnitt 5.5.2.
© 2019 - 2021 Hitachi Power Grids. Alle Rechte vorbehalten
Check Bus zone assignment
After pressing this button, the
software checks whether the bus
zone assignment is completed or
not.
 The result of the check is
indicated in a separate window.
1MRK 511 452-UDE Rev. C
GUID-48883315-F0A3-40F6-9B8E-B2BEC1BD7D0B v3
Dezentraler Sammelschienenschutz REB500
Engineering-Handbuch