Operation - Klarstein IRENE XL Bedienungsanleitung

EN
20

OPERATION

Preparation
1 Remove all the packaging including the base foam and all the adhesive tape.
2 Count all the spare parts and materials supplied with the refrigerator.
3 Place the refrigerator correctly in the right place.
4 Clean it before using and allow the unit to stand for at least 30 minutes without
power. After this period has passed, you may switch the unit on.
Switch the unit on
1 Turn the Thermostat button between "0" and "6".
2 Close the door, allow a few minutes then touch the right and left side of the
refrigerator, which will be warm to the touch.
3 After 30 minutes the refrigerator would have cooled, indicating that the compressor
system is working correctly.
4 Please readjust the thermostat to set the desired temperature.
Thermostat
• The temperature in the refrigerator is controlled by the Thermostat. "0" switches the
unit off and "6" is the coldest setting. In some special conditions (hot weather) it is
advisable to keep the unit running on a higher setting.
Food storage in the unit
• Please cover all food to avoid odour transfer.
• Allow sufficient space in the unit between foodstuffs in order to assist with improved
cold air flow.
• Hot food needs to cool to room temperature before placing in the refrigerator.
• Avoid opening the door unnecessarily – this will keep the cool air inside and
reduce the workload of the compressor.
• Please ensure all fruits and vegetables are cleaned before placing in the
refrigerator.
• Door storage is designed for lighter items and cold drinks in cans. Please place
heavier items on the shelves inside the refrigerator.
Note: It's better to allow the refrigerator to run for longer periods than switching the
unit on and off, even if there is no food in unit. This will extend the life of the unit.