Maintenance And Cleaning - Klarstein IRENE XL Bedienungsanleitung

MAINTENANCE AND CLEANING

Defrost
• If there is frost build up on the evaporator plate, the unit needs to be defrosted.
When you defrost, please remove all the food and turn the thermostat to defrost,
and open the door.
Note: If you want to speed up the defrost rate, place a bowl of hot water on the rack
and close the door. Please don't use any solid or sharp object or electric heater to
defrost as this will damage the evaporator.
Replacing the bulb
1 Should the light fail, switch off at the socket outlet and pull out the mains plug.
2 Then ensure the bulb is screwed securely in the bulb holder. Replace the plug and
switch on.
3 If the light still fails, obtain a replacement E14 screw-cap type 240V/10 Walt
(Max) bulb from your local electrical store and then fit it.
4 Carefully dispose of the burnt-out light bulb immediately.
Cleaning
• The inside of the refrigerator needs to be cleaned in order to avoid unpleasant
occurs.
• First, switch the unit off.
• Use a soft wet towel to wipe down the interior and dry with a cloth wiping away
any marks.
Note: Avoid pouring water on the outside of the refrigerator as this will affect the in-
sulation of the machine. Don't use hot water, acid, alkali, gasoline, benzene, caustic
cleanser, alcohol and hard brush to wipe the plastic parts.
Storage after use
• If really want to stop using the refrigerator for a long period of time, please switch
the unit off and follow the above information to clean and dry the unit. Thereafter
keep it in the dry and clean place. Remember to leave the door slightly open to
prevent the door seal form sticking to the cabinet.
EN
21