Warranty Terms & Conditions - TERMA MEG Gebrauchsanweisung

All manuals and user guides at all-guides.com
Warranty terms & conditions
1. The subject of this warranty is Terma electric heat-
ing element with control head. Product name and
charateristics are specified on the packaging.
2. By accepting the device on purchase, the Client
confirms that the product is of full value. The Client
should immediately inform the Seller of any discov-
ered faults – otherwise it will be understood that
the Product was faultless at the time of purchase.
This refers especially to any faults or damages of the
control panel case.
3. Warranty period for the Product is 24 months from
the date of purchase, but no longer than 36 months
from date of production.
4. Any claims made will be processed on production
of the warranty card and the evidence of purchase.
Manufacturer has the right to reject any claim on the
grounds of not presenting of any of the above docu-
ments.
5. This warranty does not comprise any faults that are
due to:
— incorrect (not in accordance with the manual)
installation, use or disassembly,
— incorrect use of the heating element (ie. for any
en
purpose that is not specified by the Manufac-
turer as intended for this type of product),
— Product being handled by unauthorized persons,
— any faults or damages caused by the Client after
having purchased and accepted the Product.
6. Central Heating installation should be fitted with
lock-shield valves, enabling disassembly of the
radiator or the heating element and its control head
without the necessity of emptying the whole system
of the heating agent. Any problems or expenses aris-
ing from lack of such valves in the installation cannot
not be used as grounds for any claims against Terma.
7. The attached Product Manual is an integral element
of the Warranty. Please read it carefully prior to the
Product installation and use.
8. The Manufacturer is obliged to remove any produc-
tion fault within 14 working days from receipt of the
faulty device to Manufacturer's premises.
9. Should the repair turn out impossible, Manufacturer
is obliged to replace the faulty Product with a new,
full-value unit of identical parameters.
25