Cleaning, Maintenance And Transportation - CombiSteel 7464.0035 Gebrauchsanweisung

WARNING:
Your cooler can have a fluorescent lamp. If the fluorescent lamp doesn't illuminate
or start blinking, please call technical service to repair it in a short while. Please do
not remain your cooler whit non-working lighting system.
WARNING:
Your cooler can have a LED illumination. If you face any problem with LED
illumination, never try to repair it yourself. Inform an authorized service.
Replacement of starter

Unplug the cooler

Dismantle the illuminated advertisement panel

Turn the starter counter clockwise and take it out

Put the new starter in the starter socket

Turn the starter clockwise to place it well in the starter socket
Only valid for glass door S220BB models with resistance (Check the name plate):
Glass doors of S220BB model has been designed with resistance to protect against sweating. Copper terminals
on the interior right and left sides corresponding to the doors of cabinet should contact with copper plates on
the sides of glass to prevent glasses getting hot and sweat. The user should ensure that doors are completely
shut in order to fully run this function. 28V voltage on copper terminals on cabinet does not pose a danger for
user health.

6. CLEANING, MAINTENANCE AND TRANSPORTATION

To ensure higher efficiency, your cooler must be regularly cleaned. Never use any cleaning agent that contains
alcohol, scouring powder or powerful solvents. Always remove the plug from the mains socket before cleaning
the cooler. Add two teaspoons of baking soda (bicarbonate of soda) in 1 liter water and use the mixture to clean
the cooler. Clean the outer part with a wet cloth and then wipe it out.
If there is a drip tray for the water to accumulate after defrosting, wipe it once a year with a damp cloth.
www.combisteel.com
9