For Carel Ecobox And Carel Energy Saving Controlled Models; Compliance Norms - CombiSteel 7464.0035 Gebrauchsanweisung

Important note:
Control unit shall compare the product using characteristic that is recorded and taken as reference with variable
using characteristic continuously. In direction of periodic changes as seasonal changes and change of opening
and closing hours of the shop, it shall learn and modify the program according to new conditions and control the
cooler continuously.
Do not close the front part of the motion sensor at the right top corner of the front louver absolutely. Otherwise,
cooler shall nog sense using frequency of cooler.

8.2 FOR CAREL ECOBOX AND CAREL ENERGY SAVING CONTROLLED MODELS:

Control unit flashes for a few seconds in order to check if all connections are made correctly when the cooler is
plugged in. This is normal, then the display will indicate current temperature. Set temperature has been adjusted
to keep your beverages at optimum temperature, please do not attempt to change the settings.
LIGHT: pushing at least 5 seconds the keypad, the light status will be toggled. Pushing the keypad,
and before than the light status will be toggle, the display will show "On" or "OFF" in order to warn
how the light status is going to change.
DAY/NIGHT MODE: the thermostat changes its mode automatically. If the door is continuously
closed for more than 4 hours, the thermostat mode will be night and the lights of the cooler will be
off. Lights can be on/off pushing the light button. If the door is opened at the night mode, the mode
will be day. At the night mode your cooler consumes less energy. If you want to change the mode to
the night you must push the day/night button. After 60 seconds from the pushing the mode will be
night.
toggle, the display will show "ECO" (Economy) or "nor" (normal) in order to warn how the functioning mode is
going to change. If the thermostat is at the ECO mode, the cooler will consume less energy.

9. COMPLIANCE NORMS

Double Door Coolers described in this manual are manufactured and inspected in compliance with the:
TS EN ISO 23953-1
TS EN ISO 23953-2
TS EN 60335-2-89
IEC 60335-2-89
2006/95/EC,
2004/108/EC
This product contains (WEEE) classification symbol, which indicates electric and electronic hardware.
Accordingly, the user must conform to 2002/96/EC European Directive for recycling in order to
minimize the environmental impact of the relevant product.
ECO MODE: pushing the keypad at least 3 seconds the ECO mode will toggle (if ECO
mode is running then it will end, if ECO mode is waiting then it will start). Pushing the
keypad, before then the ECO mode will toggle, the display will show "ECO" mode will
www.combisteel.com
12