Deflation; Valve Adapter - Parkside PALP 20-Li B2 Originalbetriebsanleitung

GB MT
5. Close the locking lever (12a)
again (press towards the
compressed air hose).
6. Set the desired pressure on the
display (4) (see "Changing the
pressure setting").
7. Insert the ball needle/valve
adapter (13/14/15/16) into
the valve on the inflatable item.
8. Turn the device on
(see "Switching on/off").
9. Press the On/off switch (10).
The LED work light (11) lights
up. When the preconfigured
pressure is reached, the device
switches off automatically.
10. Remove the valve adapter/ball
needle (13/14/15/16).
11. Put the valve cap of the infla-
table item back on (if appli-
cable).

Deflation

(only the cordless air pump)
1. Place the appropriate valve adapter
(23) on the air inlet opening (17) of the
cordless air pump.
2. Remove the valve cap of the inflatable
item and insert the valve adapter (23)
into the valve on the inflatable item.
3. Turn the device on (On/off switch (20)
to position "I").
4. Once the inflatable item is entirely
deflated, switch the device off (On/off
switch (20) to position "0").
5. Remove the valve adapter (23).
6. Put the valve cap of the inflatable item
back on.
44

Valve adapter

Valve adapter
For all standard valves
a:
with an internal diame-
ter from 8 mm.
Valve adapter
For inflatable items with
b:
a screw-on valve. Defla-
tion is only possible with
the valve unscrewed
and with adapter b.
Valve adapter
For inflatable items with
c:
an exhaust valve.
Valve adapter
For inflating air mattres-
d, f:
ses and the like.
Valve adapter
For inflating water balls
e:
and the like.
Ball needle::
For inflating different
balls.
Valve adapter
For inflating bicycle
for Presta val-
tyres.
ves:
Valve adapter
For inflating bicycle
for Dunlop/
tyres.
Woods valves: