How To Use - Silvercrest SHF 1800 A1 Bedienungsanleitung

5. How to use

• Remove all packing material. In par-
ticular the interior must be com-
pletely free of packaging remains
such as polystyrene particles.
DANGER - fire hazard!
Make sure to remove the card-
board at the top of the interior!
• Remove protective films and adhesive
strips from the device, but do not re-
move the rating plate on the underside
of the device.
• Check that all accessories are present
and undamaged.
• Clean the device and all accessories be-
fore using for the first time (see "Clean-
ing" on page 99).
• Use the recessed grips 19 to transport
the device.
• Place the device 1 on a dry, level, non-
slip, heat-resistant surface.
DANGER - fire hazard!
On the back of the device 1 you will find the
air outlet with spacer 21. Hot air escapes
from the air outlet during operation.
21
86
GB
Never cover the air outlet 21.
Never remove the spacer 21.
Do not use the hot air fryer directly un-
der wall units or wall sockets and not
near to any curtains, paper or any simi-
lar flammable objects.
Make sure that there is free space on all
sides and above the device.
• Only insert the mains plug 20 into a
wall socket after the device 1 has been
assembled for the desired purpose.
NOTE: when in operation for the first time,
some smoke and odour may be generated
by the device. This is due to the assembly
materials used for the heating element and
is not a fault in the product. Ensure adequate
ventilation.