Switching On The Lighting; Manual Settings; Switching On The Rotation Function; Using Programs - Silvercrest SHF 1800 A1 Bedienungsanleitung

11.4 Switching on the
lighting
When the light symbol
display 2, you can switch the interior light-
ing on and off:
• Press the light button
lighting on or off again.
• The light symbol
lighting is on.
• The lighting will switch off automatically
after approx. 2 minutes.

11.5 Manual settings

While the device 1 is switched on, the tem-
perature buttons
+/– 29 are visible. You can use
buttons
these to change the settings for temperature
and cooking time whenever you like, e.g.
even if a program is already running.
• With the temperature buttons
you can set the temperature between
40 °C and 200 °C:
- Press briefly for 5 °C steps.
- Keep pressed for fast forward/re-
verse.
• With the timer buttons
can set the cooking time between 1 and
60 minutes:
- Press briefly for 1-minute steps.
- Keep pressed for 5-minute steps.
NOTE: when the food dehydration
program is set, the temperature can only
be adjusted up to a maximum of 80 °C. The
cooking time can be set between 2 (02:00 )
and 24 (24:00 ) hours in 30-minute steps.
98
GB
32 is visible in the
32 to switch the
32 flashes while the
+/– 22 and the timer
+/– 22
+/– 29 you
11.6 Switching on the
rotation function
When the rotation symbol
the display 2, you can switch the rotation
function on and off manually:
• Press the rotation button
the rotation function on or off again.
• The rotation symbol
the rotation function is on.
NOTES:
• When the rotary spit program
the rotation function is switched on auto-
matically.
• If you use the rotary spit 10 or the rotat-
ing basket 12 with a different program,
switch on the rotation function manually.

11.7 Using Programs

The device has preset programs for many
foods and types of preparation. When you
select a program, you can also carry out the
following settings at any time
- Temperature
- Cooking time
- Switch on/off the rotation function
1. Prepare the food and place it into the
device (see "Using the accessories" on
page 89) with the appropriate accesso-
ry.
2. Select the desired program (see "The
programs at a glance" on page 88)
and use the cooking table as a guide
(see "Cooking table" on page 91).
3. Switch the device on using the Start/
Stop button
31.
4. Press the desired program button 33.
The corresponding symbol flashes.
5. If necessary, make manual adjustments
to the temperature and cooking time.
30 is visible in
30 to switch
30 flashes while
is set,