2.3.3 Power, Motor and Network Connection
Warning
Don't switch the PE or N wire! Dangerous voltages may occur at the power
connectors between different devices, which can result in severe personal
injury or serious damage to material.
Warning
Connect motor cable first before connecting mains!
Do not disconnect motor cable before all operation indicators are extinguished!
The motor will produce dangerous voltages due to back EMF. Don't touch the
motor plug during the motor is turning!
Caution
Choose fuses and power supply cable carefully with respect to the number of
connected devices and the total power consumption!
Figure 7: Connecting EKE05-00xx-5E-IL/-IG/-IM with power supply, motor and network
Installation
EN-14 of 38