Nicotra Gebhardt EKE05-00 Serie Bedienungsanleitung Seite 41

Approvals
European Low Voltage Directive
The EC-Controller complies to the requirements of the Low Voltage Directive 2006/95/EC.
The unit has been manufactured according to the standard
converters
- General requirements and line commutated
European Machinery Directive
The EC-Controller does not impinge on the application field of the Machinery Directive
2004/108/EC.
European EMC Directive
The EC-Controller is supplied exclusively in connection with products of the company
Nicotra Gebhardt. The unit is fully integrated in the corresponding products and then
complies to all requirements of the EMC directive, and according to the EMC product
standard for electrical drives with variable speed EN 61800-3.
Underwriters Laboratories
UL recognized: E 235828
the usage only in a pollution degree 2 environment
The following device types are UL recognized:
EKE 05-0018-5E-IG
EKE 05-0018-5E-IM
Note
Motor over temperature sensing according UL 508C is not provided by the
drive, but the current regulation limits the current within 1 msec at a level of
1.7 Amp. If this leads to speed reduction below the set point, the controller will
disable the motor after 1 minute because of speed controller error.
EN 60146-1-1 (Semiconductor
converters .
)
EN-4 of 38