1 Overview
1.1 The Nicotra Gebhardt EC-Controller
The EC-Controller EKE 05-00xx-5E-Ix is an inverter for controlling the speed of motor-
impeller-units with Brushless-DC motors. The inverter is DSP-controlled and uses modern
Insulated Gate Bipolar Transistor (IGBT) technology for electrical power conversion. This
makes them reliable and versatile. The EC-Controller provides inverter and motor overload
protection.
The EC-Controller can be used in both stand-alone applications as well as in large fan
systems using the integrated network interface for controlling and monitoring purposes.
1.2 Features
1.2.1 Main Characteristics
Wide range of supply voltage (EKE05-0018 only)
Integrated Power Factor Controller
Easy installation and commissioning
Simple cable connection with plugs
Integrated network interface (L
®
W
, Modbus RTU or Nicotra Gebhardt G-BUS
ON
ORKS
modules available)
Analogue interface module available (0-5V, 0-10V, ERROR dry contact)
1.2.2 Performance Characteristics
Closed-loop speed control function
Up and down ramp
Storage of the last speed set value
Self-acting restart after power loss with customisable delay
Restart in right direction from any rotating speed and direction after power-on
Electronically braking function (EKE05-0018 only)
High efficiency
Available with 400W (EKE 05-0018) and 1000W (EKE 05-0040) maximum input power
Power Factor >97%
1.2.3 Protection Characteristics
Under voltage protection
Overload protection
Impeller lock-up protection
Adjustable maximum speed according to the impeller size
Overview
EN-8 of 38