Care And Cleaning; Cleaning The Motor Base; Using The Self-Cleaning Feature - Gastroback DESIGN PERSONAL BLENDER PRO 41039 Bedienungsanleitung

CARE AND CLEANING

WARNING: Always unplug the appliance, before moving, disassembling, or
cleaning the appliance. Do not hold your hands or any foreign objects into
the coupling on the motor base with the appliance still connected to the
power supply.
Always handle the blade assembly with caution to avoid injuries, as the blades
are very sharp.
remove the blades from the base of the blade assembly or attempt to separate the
blades.
Do not use scouring pads, abrasive cleaning agents or aggressive liquids (e.g.
bleach, solving agents) for cleaning the appliance or any parts of it, to avoid dama-
ge to the surfaces. Do not use any hard or sharp-edged objects for cleaning. Do
not immerse the motor base or the power cord in water or any other liquid. Do not
spill or drip any liquids on or in the motor base or power cord to avoid risk of fire
and electric shock. Jars, lids and blade assembly may be cleaned in an automatic
dishwasher in the top rack. However, DO NOT clean the motor base or power
cord in an automatic dishwasher.
In general, you should avoid to leave any food dry on the jar after processing. As
well, you should not store food for an extended period of time in the jar. After pro-
cessing, remove and rinse the blade assembly and, if desired, close the jar with a
provided lid. To clean the jar, use warm dishwater and proceed according to the
following instructions. This way, you avoid the build-up of dried-on food on the jar,
lid and blade assembly, and keep the appliance hygienically clean.
Do not operate the appliance with warm or hot liquids. The grinding jar is NOT
intended for usage with any liquids.

CLEANING THE MOTOR BASE

Do not clean the motor base or power cord in an automatic dish-
CAUTION:
washer.
1. Unplug the appliance.
2. Wipe the motor base with a slightly damp cloth. Then wipe dry. Thereafter, lea-
ve the motor base dry naturally for approx. 30 minutes, where it is out of reach
of young children.

USING THE SELF-CLEANING FEATURE

You may clean jar and blade assembly effortlessly, via running the appliance for 10
seconds with some cold water. Just proceed according to the following instructions.
IMPORTANT: Do not fill the jar over the MAX filling level to avoid overload to the
motor. Do not fill in hot or even warm liquids. Do not process the dishwater for more
Only touch the blade assembly by its base. Do not attempt to
Do not use violence!
47