Commissioning
Operating interfaces
Engineering tool »EASY Starter«
Engineering tool »EASY Starter«
The »EASY Starter« is a PC software that is especially designed for the commissioning and
diagnostics of the inverter.
»EASY Starter«
Download
•
Sample screenshot:
The five main commissioning steps are shown in order towards the top of the Settings tab.
Clicking on a link displays a corresponding interface containing the most important parameters
that need to be set.
Commissioning step
Description of the settings
Basic setting
Settings for adjusting the inverter to a simple application based on the default settings.
Communication
Settings for communication via the on-board EtherCAT, another network option, and the engineering port X16 (PC
interface).
Kinematics
Basic settings of the technology application for adjusting the motor end and load side (gearbox ratio, mounting
direction, moments of inertia, etc.)
Motion
Basic settings of the technology application for adjusting the motion control.
Technology application
Settings for adjusting the technology application for the application.
Parameter fields
The parameters are sorted thematically.
•
The currently set parameter values are displayed.
•
Fields highlighted in yellow indicate an online connection to the device.
•
Pressing the [F1] key opens the program help.
•
168