Product Overview; Controls - Toro Z Master 4000 Serie Bedienungsanleitung

Product Overview

1. Height-of-cut positions

2. Controls

3. Motion-control levers
4. Electric deck lift (certain
models only)
5. Roll bar
6. Shock assembly
Figure 4
7. Fuel cap
8. Parking-brake lever
9. Mower deck
10. Caster wheel
11. Anti-scalp roller
Controls
Become familiar with all the controls before you start
the engine and operate the machine.
Control Panel
g332505
1. Key switch
2. Blade-control switch
(power takeoff)
3. Throttle control
Key Switch
The key switch, used to start and shut off the engine,
has 3 positions: O
Starting the Engine (page
Light Switch
For Models with Lights Only
Use the light switch to turn the lights to the O
or O position
FF
Choke Control
Use the choke control to start a cold engine.
11
Figure 5
4. Light switch (for models
with lights only)—optional
kit for other models
5. Hour meter
6. Choke control (for
carbureted models only)
, R , and S
FF UN TART
24).
(Figure 5).
g332503
. Refer to
position
N