Product Overview; Controls - Toro eS3000SD 72V Bedienungsanleitung

Product Overview

1. Brake pedal
2. Traction pedal
3. Mower deck
4. Anti-scalp roller
5. Parking-brake lever

Controls

Become familiar with all the controls before you start
and operate the machine.
Control Panel
1. USB port
2. Drive-mode switch
3. Reverse-mowing
operation button
4. Cruise-control operation
button
Key Switch
The key switch has 2 positions: O
key switch to start or shut off the machine.
Figure 6
6. Grass deflector
7. Control panel
8. Operator seat
9. Height-of-cut lever
10. Steering Wheel
Figure 7
5. Blade-control switch
6. Battery charge indicator
7. Key switch
and O . Use the
N FF
Blade-Control Switch (Power
Takeoff)
The blade-control switch, represented by a
power-takeoff (PTO) symbol, engages and
disengages power to the mower blades.
Brake Pedal
Use the brake pedal to stop or slow the machine.
Parking-Brake Lever
Whenever you shut off the machine, engage the
parking brake to prevent accidental movement of the
machine.
g340907
•
To engage the parking brake, pull the parking-brake
lever up.
1. Engage the parking brake. 2. Disengage the parking
•
To disengage the parking brake, press the button
on the parking-brake lever and then push the
parking-brake lever forward
g340906
Traction-Control Pedal
Use the traction-control pedal to vary the ground
speed of the machine. The farther you press the
pedal, the faster the machine moves.
Drive-Mode Switch
The drive-mode switch has 3 positions: F
N , and R
EUTRAL
be in the F
ORWARD
mower blades.
Note:
An audible alarm sounds when the drive-mode
switch is in the R
in reverse at half the forward speed.
14
Figure 8
brake.
. The drive-mode switch must
EVERSE
position before engaging the
position. The machine moves
EVERSE
g341485
,
ORWARD