Eko DUO Benutzerhandbuch Seite 10

3.2
DUO Use
The device is OFF. All functions
of the device are disabled.
The device is ON but not
paired. Active LED blnks
every 1.5 seconds. The device
is discoverable and ready to
connect via Bluetooth.
The device is ON and paired
with a phone/tablet. Active
LED is lit and solid. The device
is streaming live audio and
ECG to the paired device.
The device is ON. The filter
change is indicated by the
active LED in the LED ring
rotating to a new position.
P.
10
The device is ON and has low
battery. The red warning LED
turns on. Device functions
normally.
The device is ON and its
battery level is below 10%.
The LED flashes rapidly for 4
seconds, then turns off. The
device will no longer stream or
playback audio or ECG.
The device is OFF and is
charging.
The device is OFF and fully
charged.