Setup The Weather Server Connection - Bresser 7003300 Bedienungsanleitung

4 . Once connected, enter the following IP address into your Internet browser's address bar, to
access the console's web interface:
NOTE :
- Some browsers will treat 192.168.1.1 as a search, so make sure you include http:// header .
- Recommended browsers, such as the latest version of Chrome, Safari, Edge, Firefox or Opera .
- WI-FI network interface of PC/Mac or mobile subject to change .
WI-FI CONNECTION STATUS
Below is the WI-FI icon status on the console LCD:
Stable: Console is in
connection with WI-FI router

SETUP THE WEATHER SERVER CONNECTION

Enter the following information into the below web interface "SETUP" page to connect the
console to weather server, If you do not want to use Wunderground.com or Weathercloud.net,
please empty the station ID & key to ignore the data upload .
Press to search router
Press to allow add
router manually
Enter new Station ID and
Station key that assigned
by Wunderground
Enter new Station ID and
Station key that assigned by
weathercloud
Enter the latitude value
Enter the longitude value
WIFI firmware version
http://192.168.1.1
Flashing: Console is trying to
connect to WI-FI router
SETUP page
SETTINGS
SETUP
Language:
WiFi Router setup
Search
Router: ROUTER_A
Add Router
Security type: WAP2
******
Router Password:
Weather server setup
Wunderground
Station ID: WDw124
******
Station key:
Weathercloud
Station ID: IPACIR23Wc
Station key:
******
URL: http://WAC .com
Station ID: IDCR21w1
******
Station key:
Mac address
00:0E:C6:00:07:10
Time server setup
Server URL: nist .time .gov
0:00
Time Zone:
Location for sunrise / sunset
*Latitude: 0 .0000
Enter 0 to 90, no negative numbers
*Longitude: 0 .0000
Enter 0 to 180, no negative numbers
Hemisphere N
* Depends on the model
Firmware version: 1 .00
Flashing: Console currently in
Press "ADVANCED" icon to
ADVANCED
advanced page
English Select setup UI display language
Select router (SSID) for connection
Manually enter the SSID if not on list
Select
WAP2)
Router password (leave blank if the
security type is "Open")
Reserved for validated weather server
(e .g . AWEKAS), detail please consult with
your retailer .
Enter new station ID and key that
assigned by the corresponding weather
server
Select time server
Select time zone of your location
Select the direction (e .g . EU countries
North
Longitude is East and US is West)
East
Select the sensor located hemisphere
(e .g . US and EU countries are also "N",
Australia is "S")
Press to complete the setting
Apply
44
Access Point (AP) mode
security type (usually
router's