Bresser 7003300 Bedienungsanleitung Seite 37

ASSEMBLY THE STAND AND POLE
Step 1
Insert the top side of the pole to the square hole of the
weather sensor .
NOTE:
Ensure the pole and sensor's indicator align .
Step 2
Place the nut in the hexagon hole on the sensor, then
insert the screw in other side and tighten it by the screw
driver .
Step 3
Insert the other side of the pole to the square hole of the
plastic stand .
NOTE:
Ensure the pole and stand's indicator align .
Step 4
Place the nut in the hexagon hole of the stand, then
insert the screw in other side and then tighten it by the
screw driver .
37