Setup The Weather Server Connection - Bresser 7803210 Bedienungsanleitung

6.3

SETUP THE WEATHER SERVER CONNECTION

Enter the information into the following web interface "SETUP" page. Ensure all information is
entered prior to pressing
Press to search router
Press to allow add
router manually
Current firmware
version
NOTE:
- If you don't have station ID and station key available for the upload, you need to first create an account at
ProWeatherLive (PWL), followed by registering the product to obtain the ID and key. For details, please
refer to "Create PWL account and add new device in PWL" in section 5.
- When WI-FI setup is completed, your PC/Mac or smart phone will resume its default WI-FI connection.
- During AP mode, you can press and hold the [ SENSOR / WI-FI ] key for 6 seconds to stop AP mode and
the console will restore your previous setting.
- Changing the hemisphere setting will automatically switch the direction of the moon phase on the display.
to connect the console to ProWeatherLive.
Apply
SETTINGS
SETUP
WiFi Router setup
Search
Router: ROUTER_A
Add Router
Security type: WPA2
Router Password:
Weather server setup
ProWeatherLive
Station ID:
PWL2345678
Station key: 112233
Mac address
00:0E:C6:00:07:10
Outdoor sensor direction
Point to : N
Firmware version: 1.00
SETUP page
ADVANCED
Language: English
Apply
33
Press "ADVANCED" icon to go
to advanced page
Select setup UI display language
Select WIFI/network (SSID) for
connection
Manually enter the SSID if not on list
Select router's security type
WIFI/Network password (leave blank
if the security type is "Open")
Enter station ID and
key assigned by
ProWeatherLive (PWL)
Device Mac address
Select the sensor located hemisphere
(e.g. US and EU countries are "N"
Australia is "S")
Press to complete the WI-FI related
setting