Dip Switch - Carrier 40VCW1 Installations- Und Bedienungsanleitung

Dip Switch

Dip switch definition
Dip Switch SW1
SW1 ON
SW1-1 Slave wired controller
SW1-2 Room temperature display on
SW1-3 Room temperature collected from indoor unit
SW1-4 System remains off after power loss
SW1-5 Old protocol (models develioed before Ayg, 2013
SW1-6 Backlight always on
SW1-7 Reserved
Dip Switch SW2
SW2 ON
SW2-1 Mode Lock
SW2-2 No button confirmation tone.
(Tone will still be audible when
command is sent by wireless remote).
SW2-3 Reserved
SW2-4 Reserved
Initialization
When the mini-split system is powered on, 88.8 will flash between the Room Temperature display and the Set
Temperature display, until communication is established with the indoor unit.
Audible Alert
Press to power ON or power OFF the control. A tone will be heard with every button press or when a command
is received by a remote control. If a conflicting command is received, then the tone will beep 3 times.
OFF
Master wired controller
Room temperature display off
Room temperature collected from
controller
Auto restart after power loss
New protocol
Backlight 15 second auto time out
Reserved
OFF
Normal
Tone on
Reserved
Reserved
3
Default
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Default
Normal
OFF
OFF
OFF