Lubricating The Seals; Specifications; High-Pressure Washer Stihl Re 90.0 - Stihl RE 90 Gebrauchsanleitung

19 Specifications

18.2 Lubricating the seals

1
1
► Grease the seals (1) with grease for fittings.
19 Specifications

19.1 High-pressure washer STIHL RE 90.0

Version 100 V / 50-60 Hz
– Fuse (characteristic "C" or "K"): 15 A
– Power consumption: 1.4 kW (EU) 2019/1781 §2(2) (j)
– Maximum permitted network impedance: 0.15 Ohm
– Protection class: II
– Degree of of electrical protection:IPX5
– Working pressure (p): 6.7 MPa (67 bar)
– Max. permissible pressure (p max.): 10 MPa (100 bar)
– Max. water supply pressure (p in max.): 1 MPa (10 bar)
– Max. water throughput (Q max.): 7.5 l/min (450 l/h)
– Minimum water throughput (Q min.): 5.4 l/min (320 l/h)
– Max. suction lift: 0.5 m
– Max. water temperature in pressure mode (t in max):
40 °C
– Max. water temperature in suction mode: 20 °C
– sample inspection
0458-002-9821-A
1
– Length: 340 mm
– Width: 320 mm
– Height: 880 mm
– Length of high-pressure hose: 6 m
– Weight (m) with accessory attached: 8 kg
Version 127 V / 60 Hz
– Fuse (characteristic "C" or "K"): 15 A
– Power consumption: 1.5 kW (EU) 2019/1781 §2(2) (j)
– Maximum permitted network impedance: 0.15 Ohm
– Protection class: II
– Degree of of electrical protection:IPX5
– Working pressure (p): 7.2 MPa (72 bar)
– Max. permissible pressure (p max.): 10 MPa (100 bar)
– Max. water supply pressure (p in max.): 1 MPa (10 bar)
– Max. water throughput (Q max.): 7.5 l/min (450 l/h)
– Minimum water throughput (Q min.): 5.5 l/min (330 l/h)
– Max. suction lift: 0.5 m
– Max. water temperature in pressure mode (t in max):
40 °C
– Max. water temperature in suction mode: 20 °C
– sample inspection
– Length: 340 mm
– Width: 320 mm
– Height: 880 mm
– Length of high-pressure hose: 6 m
– Weight (m) with accessory attached: 8 kg
Version 120 V - 127 V / 60 Hz
– Fuse (characteristic "C" or "K"): 15 A
– Power consumption: 1.5 kW (EU) 2019/1781 §2(2) (j)
– Maximum permitted network impedance: 0.15 Ohm
– Protection class: II
English
65