Saving Energy; Using The Cooler - Dometic CDF2 36 Bedienungsanleitung

Operation
6.2

Saving energy

• Choose a well ventilated location which is protected from direct sunlight.
• Allow warm food to cool down first before placing it in the cooling device to
keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
• If the cooler has a basket: For optimal energy consumption, position the basket
according to its position on delivery.
• On a regularly basis, make sure the lid seal still fits properly.
6.3 Opening or removing the lid
➤ Proceed as shown (fig. 4, page 4).
6.4 Connecting the cooler
!
WARNING!
• Connect the device with the supplied DC cable only.
• Do not modify the DC cable. Modifying the DC cable may cause
safety risks.
• The DC cable must always be protected by 8 A fuse.
A
NOTICE! Danger of damaging the device
Disconnect the cooler and other consumer units from the battery before
you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.
➤ Proceed as shown (fig. 5, page 4).
6.5

Using the cooler

A
NOTICE! Danger of overheating
Ensure at all times that there is sufficient ventilation so that the heat that
generated during operation can dissipate. Ensure that the ventilation
slots are not covered. Make sure that the device is sufficiently far away
from walls and other objects so that the air can circulate.
18
CDF236
EN