Service Data - IKEA KULINARISK 704.168.21 Bedienungsanleitung

ENGLISH
Problem
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
The display shows F111.
The display shows an error
code that is not in this table.
Steam and condensation set‐
tle on the food and in the
cavity of the oven.
The lamp is turned off.

Service data

If you cannot find a solution to the problem
yourself, contact an Authorised Service
Centre.
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Possible cause
The door is not closed cor‐
rectly.
The fuse is blown.
The lamp is defective.
The plug of the core temper‐
ature sensor is not correctly
installed into the socket.
There is an electrical fault.
You left the dish in the oven
for too long.
The Moist Fan Baking func‐
tion is turned on.
We recommend that you write the data here:
Fully close the door.
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again and
again, contact a qualified
electrician.
Replace the lamp.
Put the plug of the core tem‐
perature sensor as far as
possible into the socket.
• Turn off the oven with the
• If the display shows the
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
Normal behavior of the Moist
Fan Baking function. Refer to
"Daily Use" chapter, Heating
Functions.
The necessary data for the service centre is
on the rating plate. The rating plate is on the
front frame of the oven cavity. Do not
remove the rating plate from the oven cavity.
.........................................
.........................................
.........................................
Remedy
house fuse or the safety
switch in the fuse box and
turn it on again.
error code again, contact
an Authorised Service
Centre.
26